sony VPL CXZ10 3LCD projector

Display system: 3 LCD system

Display device:

Size of effective display area: 0.63”(16.0 mm) x 3 BrightEra LCD Panel, Aspect ratio: 4:3

Number of pixels: 2,359,296 (1024 x 768 x 3) pixels

Projection lens:

Focus: Manual

Zoom - Powered/Manual: Manual

Zoom - Ratio: Approx. x 1.6

Throw ratio: 1.41:1 to 2.27:1

Lens shift: N/A (Lens Offset Vertical +33%)

Light source:

Type: Laser diode

Filter cleaning / replacement cycle (Max.): Standard mode : 1000 H (cleaning)

Screen size: 40" to 300" (1.02 m to 7.62 m)

Light output:

Mode: Standard: 5,000 lm

Mode: Standard (Centre): 5,200 lm

Color light output:

Mode: Standard: 5,000 lm

Contrast ratio (full white / full black): ? :?

Speaker: 16 W (monaural)

Displayable scanning frequency:

Horizontal: 15 kHz to 92 kHz

Vertical: 48 Hz to 92 Hz

Accepted signal resolution:

Computer signal input: Maximum signal resolution: 1920 x 1200 *4

Video signal input: NTSC, PAL, SECAM, 480/60i, 576/50i, 480/60p, 576/50p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/60p, 1080/50p, 1080/24p

Color System: NTSC3.58, PAL, SECAM, NTSC4.43, PAL-M, PAL-N, PAL60

Keystone correction (Max.): 

Horizontal: +/- 30 degrees

Vertical: +/- 30 degrees

INPUT OUTPUT (Computer/Video/Audio/Control):

INPUT A: RGB / Y PB PR input connector:Mini D-sub 15 pin (female), Audio input connector: Stereo mini jack

INPUT B: HDMI input connector: HDMI 19-pin, HDCP support, Audio input connector: HDMI audio support

INPUT C: HDMI input connector: HDMI 19-pin, HDCP support, Audio input connector: HDMI audio support

VIDEO IN:Video input connector: Phono jack, Audio input connector: Shared with INPUT A

OUTPUT: Audio output connector: Stereo mini jack

REMOTE: D-sub 9-pin (male) / RS232C

LAN: RJ45, 10BASE-T/100BASE-TX

USB: TYPE-A (Only for FW upgrade)

Acoustic Noise:

Lamp Mode: Standard / Middle / Low: 36 dB / 32 dB / 28 dB

Operating temperature / Operating humidity: 0°to 40°C (32°F to 104°F) / 20 % to 80 % (no condensation)

Storage temperature / Storage humidity: -10° to +60°C (14°F to 140°F) / 20 % to 80 % (no condensation)

Power requirements: AC 100 V to 240 V, 3.4 A to 1.5 A, 50 Hz / 60 Hz

Power Consumption: 

AC 100 V to 120 V: Mode: Standard: 342 W

AC 220 V to 240 V: Mode: Standard: 326 W

Power Consumption (Standby Mode):

AC 100 V to 120 V: 0.5 W (when "Standby mode" is set to "Low")

AC 220 V to 240 V: 0.5 W (when "Standby mode" is set to "Low")

Power Consumption (Networked Standby Mode):

AC 100 V to 120 V: 2 W (“Remote Start” is set to “On” , when "Standby Mode" is set to “Low")

15W (ALL Terminals and Networks Connected, when "Standby Mode" is set to "Standard")

AC 220 V to 240 V: 2 W (“Remote Start” is set to “On” , when "Standby Mode" is set to “Low")

15W (ALL Terminals and Networks Connected, when "Standby Mode" is set to "Standard")

Standby Mode / Networked Standby Mode Activated: Approx. 10 Minutes

Heat dissipation:

AC 100 V to 120 V: 1167 BTU/h

AC 220 V to 240 V: 1112 BTU/h

Dimensions (W x H x D) (without protrusions):Approx. 371 x 100 x 319.3 mm (14 19/32 x 3 15/16 x 12 9/16 inches)

Mass: Approx. 5.7 kg (13 lb )

Supplied accessories:

Remote commander: RM-PJ8